Simpson Strong-Tie SL37178HSS Description

Strong-Tie Sleeve-All wedge anchors are pre-assembled expanding anchors for use in solid base materials. They secure into concrete and brick to hollow and grouted CMU.

Simpson Strong-Tie SL37178HSS Includes

• (50) Sleeve-All Hex-Head Stainless-Steel Sleeve Anchors

Simpson Strong-Tie SL37178HSS Features

• Pre-assembled expanding anchors
• Optimal performance in demanding structural applications
• Available in various head options
• 304 stainless steel for corrosion resistance

Simpson Strong-Tie SL37178HSS Applications

• Securing into concrete and brick
• Hollow and grouted CMU anchoring
• Structural applications requiring reliable anchoring

Simpson Strong-Tie SL37178HSS Installation Overview

1. Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
2. Drill to the specified embedment depth and clean the hole using compressed air.
3. Place the anchor in the fixture and drive it into the hole until the washer and nut are tight against the fixture.
4. Tighten to the required installation torque.

Simpson Strong-Tie SL37178HSS Specifications

NOTE: Oversized holes will make it difficult to set the anchor and will reduce the anchor’s load capacity.