Simpson Strong-Tie CD25312C Description

The Simpson Strong-Tie Crimp Drive anchor is an easy-to-install expansion anchor for use in concrete and grout-filled block. The pre-formed curvature along the shaft creates an expansion mechanism that secures the anchor in place and eliminates the need for a secondary tightening procedure.

Simpson Strong-Tie CD25312C Includes

• (100) Crimp Drive Anchor Zinc-Plated Countersunk Head 1/4 in. x 3-1/2 in.

Simpson Strong-Tie CD25312C Features

• Unique curved shaft design that speeds up anchor installation and reduces overall project cost
• Countersunk head allows for a smooth surface when attaching wood or light gauge steel to concrete and grout-filled block
• Available in five different head styles

Simpson Strong-Tie CD25312C Applications

• Brick Solid
• Countersunk head provides a zero-profile solution
• Ideal for attaching wood or light gauge steel to concrete and grout-filled block

Simpson Strong-Tie CD25312C Installation Overview

1. Drill a hole using the specified diameter carbide bit into the base material to a depth of at least 1/2″ deeper than the required embedment.
2. Blow the hole clean of dust and debris using compressed air.
3. Drive the anchor through the fixture into the hole until the head sits flush against the fixture.
4. Ensure the anchor is driven to the required embedment depth.

Simpson Strong-Tie CD25312C Specifications

NOTE: Use these products in dry, interior, and non-corrosive environments only.