Simpson Strong-Tie SL31312PF Description

Strong-Tie Sleeve-All wedge anchors are pre-assembled expanding anchors for use in solid base materials. They secure into concrete and brick to hollow and grouted CMU.

Simpson Strong-Tie SL31312PF Includes

• (50) Sleeve-All 5/16 in. x 3-1/2 in. Phillips Flat-Head Sleeve Anchor

Simpson Strong-Tie SL31312PF Features

• Pre-assembled expanding anchors for solid base materials
• Optimal performance in demanding structural applications
• Available in various head options including flat head

Simpson Strong-Tie SL31312PF Applications

• Securing into concrete and brick
• Hollow and grouted CMU applications
• General structural anchoring

Simpson Strong-Tie SL31312PF Installation Overview

1. Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
2. Drill to the specified embedment depth and clean the hole using compressed air.
3. Place the anchor in the fixture and drive it into the hole until tight.
4. Tighten to the required installation torque.

Simpson Strong-Tie SL31312PF Specifications

NOTE: Oversized holes will make it difficult to set the anchor and will reduce the anchor’s load capacity.