Simpson Strong-Tie HETA12 Description

The HETA12 Embedded Truss Anchor provides a reliable solution for attaching roof trusses to concrete and masonry walls, designed for high-wind construction and seismic forces.

Simpson Strong-Tie HETA12 Includes

• (1) HETA12 Embedded Truss Anchor

Simpson Strong-Tie HETA12 Features

• Indented embedment line ensures accurate embedment depth
• Compatible with Simpson Strong-Tie TSS and TBP8 moisture barrier plate
• Load rated for wind and seismic forces

Simpson Strong-Tie HETA12 Applications

• High-wind construction
• Seismic force resistance

Simpson Strong-Tie HETA12 Installation Overview

1. Use all specified fasteners as per guidelines.
2. Embed 4 inches into a 6-inch minimum concrete beam or 8-inch nominal grouted block wall.
3. For mislocated truss anchors, provide a shim if the gap is between 1/8 inch and 1 1/2 inches.
4. Ensure minimum spacing of single anchors is twice the embedment depth for full load.
5. In double anchor installations, install anchors with spoons facing outward and straps spaced no more than 1/8 inch wider than the rafter/truss width.

Simpson Strong-Tie HETA12 Specifications

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values.