Simpson Strong-Tie CPS4-R Description

The CPS4-R Composite Plastic Standoff provides a code-required 1″ standoff for 4×4 posts, featuring a durable composite plastic construction and a black finish for a custom look.

Simpson Strong-Tie CPS4-R Includes

• (1) Composite Plastic Standoff for 4×4

Simpson Strong-Tie CPS4-R Features

• Provides code-required 1″ standoff
• Multiple sizes to support a variety of projects
• Black finish for a custom look

Simpson Strong-Tie CPS4-R Applications

• Fastening wood to concrete or masonry
• Indoor architectural projects requiring decorative hardware

Simpson Strong-Tie CPS4-R Installation Overview

1. Drill a 3/4″-diameter hole, 10″ into the center of the post.
2. Clean out sawdust and fill hole halfway with Simpson Strong-Tie SET-3G epoxy anchoring adhesive.
3. Insert all-thread rod while twisting the rod, and allow the epoxy to set and cure.
4. Secure standoff to post using four 0.148″ x 3″ nails.
5. Drill a 3/4″-diameter hole per anchor design for concrete.
6. Clean out dust and fill hole halfway with Simpson Strong-Tie SET-3G, ET-3G or AT-3G anchoring adhesive.
7. Insert post subassembly into hole, and allow the epoxy to set and cure.

Simpson Strong-Tie CPS4-R Specifications

NOTE: Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non-top-supported installations (such as fences or unbraced carports).