Simpson Strong-Tie SL75212H Description

The Sleeve-All Hex-Head Sleeve Anchor is a zinc-plated carbon steel anchor designed for secure fastening in solid base materials such as concrete and brick. It is pre-assembled for ease of use and offers reliable performance in structural applications.

Simpson Strong-Tie SL75212H Includes

• (10) 3/4 in. x 2-1/2 in. Sleeve-All Hex-Head Sleeve Anchor

Simpson Strong-Tie SL75212H Features

• Zinc-plated carbon steel for durability
• Hex-head design for easy installation
• Pre-assembled expanding anchor for solid base materials
• Suitable for concrete, brick, and CMU applications

Simpson Strong-Tie SL75212H Applications

• Securing fixtures to concrete and brick
• Structural applications in construction
• Use in hollow and grouted CMU

Simpson Strong-Tie SL75212H Installation Overview

1. Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
2. Drill to the specified embedment depth and clean the hole using compressed air.
3. Place the anchor in the fixture and drive it into the hole until the washer and nut are tight against the fixture.
4. Tighten to the required installation torque.

Simpson Strong-Tie SL75212H Specifications

NOTE: Oversized holes will make it difficult to set the anchor and will reduce the anchor’s load capacity.