Simpson Strong-Tie STB2-625006SS Description

The Strong-Bolt 2 Wedge Anchor is a high-performance mechanical anchor designed for concrete applications, offering durability and reliability.

Simpson Strong-Tie STB2-625006SS Includes

• (20) Strong-Bolt 2 Wedge Anchor Type 316 Stainless Steel

Simpson Strong-Tie STB2-625006SS Features

• Chamfered top designed to prevent mushrooming during installation
• Qualified for static and seismic loading conditions (seismic design categories A through F)
• Suitable for horizontal, vertical and overhead applications
• Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck
• Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
• Tested per ACI355.2 and AC193

Simpson Strong-Tie STB2-625006SS Applications

• Concrete anchoring for structural and non-structural applications
• Seismic design categories A through F
• Horizontal, vertical, and overhead installations

Simpson Strong-Tie STB2-625006SS Installation Overview

1. Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed.
2. Assemble the anchor with nut and washer so the top of the nut is flush with the top of the anchor.
3. Place the anchor in the fixture, and drive it into the hole until the washer and nut are tight against the fixture.
4. Tighten to the required installation torque.

Simpson Strong-Tie STB2-625006SS Specifications

NOTE: Do not use an impact wrench to set or tighten the Strong-Bolt 2 anchor. Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor’s load capacity.