Simpson Strong-Tie SSWP-KT Description

The Simpson Strong-Tie SSWP-KT Steel Portal Frame Connection Kit is designed for shearwall applications, providing superior performance and simplifying installation.

Simpson Strong-Tie SSWP-KT Includes

• (2) 10-gauge SSWPS straps
• (8) #14 x 1″ self-drilling screws
• Installation instructions

Simpson Strong-Tie SSWP-KT Features

• Simplifies installation to provide superior performance
• Straps designed specifically for the Steel Strong-Wall used in portal applications
• #14 x 1″ self-drilling screws to attach the straps to the Steel Strong-Wall

Simpson Strong-Tie SSWP-KT Applications

• Garage Portal System on Concrete Foundation

Simpson Strong-Tie SSWP-KT Installation Overview

1. Position header flush with exterior face of the Steel Strong-Wall shearwall.
2. Install SSWPS straps on exterior face of the Steel Strong-Wall shearwall using #14 x 1″ self-drilling screws.
3. Shim between Steel Strong-Wall and header, if necessary, with a maximum shim thickness of 7/8″.
4. Use 1/4″ x 3 1/2″ Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screws to attach SSW to header.
5. Install SSWPS straps to exterior face of header using ten 0.148″ x 2 1/2″ nails.
6. Walls with 2×4 preattached studs may also be used in 2×6 wall framing by adding furring to the opposite side.
7. Walls may be installed with solid or multi-ply headers.

Simpson Strong-Tie SSWP-KT Specifications

NOTE: Ensure the portal frame connection kit is installed correctly to achieve the increased load values listed for the portal frame system.