Simpson ACBH3X15.37-KT Description

The ACBH3X15.37-KT is a concealed beam hanger kit designed for high-performance connections in mass timber and engineered wood construction.

Simpson ACBH3X15.37-KT Includes

• (2) ACBH 3×15.37 Concealed Beam Hanger Backplates
• (48) SDCF22614 screws

Simpson ACBH3X15.37-KT Features

• High capacity
• Concealed for architectural aesthetics and fire-rated performance
• One- and two-hour fire resistance ratings per ASTM E119
• Recommended for use at beam-to-beam connections in any Seismic Design Category, and at beam-to-column connections in Seismic Design Category A or B
• Multiple router options to suit jobsite needs
• +/- 1/16″ beam length tolerance on each end enables easier installation

Simpson ACBH3X15.37-KT Applications

• Mass timber and engineered wood beam-to-column connections
• Architectural and exposed-framing projects where visible hardware is undesirable
• Residential, commercial, and institutional buildings using concealed timber joinery

Simpson ACBH3X15.37-KT Installation Overview

1. Ensure all components are clean, aligned, and free of defects.
2. Align the ACBH hanger at the designated connection point according to plans.
3. Install Strong-Drive SDCF Timber-CF screws at a 45 angle through the pre-aligned fastener tabs.
4. Insert the beam into the hanger pocket, ensuring full seating and structural contact.
5. Confirm all fasteners are secure and the connection complies with design requirements.

Simpson ACBH3X15.37-KT Specifications

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values