Simpson AT3G10 Description

The AT3G10 is a high-strength hybrid acrylic adhesive cartridge designed for anchoring threaded rods and rebar into concrete. It offers rapid curing, cold weather suitability, and compliance with ICC-ES AC308 standards.

Simpson AT3G10 Includes

• (1) High-Strength Acrylic Anchoring Adhesive Cartridge
• (1) AMN19Q Mixing Nozzle

Simpson AT3G10 Features

• Excellent for use in cold weather conditions or applications where fast cure is required
• Recognized per ICC-ES AC308 for threaded rod and rebar anchoring
• Conventional blow-brush-blow hole cleaning technique using a wire brush
• Base material installation temperatures down to 0F (-18C)
• Use in grout-filled CMU construction
• Installation into oversized holes
• Installation in holes drilled with diamond core bits

Simpson AT3G10 Applications

• Threaded rod anchor and rebar dowel installations in cracked and uncracked concrete
• Installation in downward, horizontal, and upwardly inclined orientations
• Qualified for use in structures assigned to Seismic Design Categories A through F

Simpson AT3G10 Installation Overview

1. Ensure surfaces to receive adhesive are clean per approved hole cleaning method.
2. Base-material temperatures must be 23F (-5C) or above at the time of installation.
3. Store cartridges in a warm, uniformly heated area to warm cold adhesive.
4. Use only Simpson Strong-Tie mixing nozzles as per instructions.
5. Mixed material in nozzle can harden in 2-3 minutes at temperatures of 70F (21C) and above.

Simpson AT3G10 Specifications

Mix Ratio/Type 10:1 hybrid-acrylic Mixed Color Gray Base Materials Concrete cracked and uncracked Base Material Conditions Dry, water-saturated, water-filled holes Anchor Type Threaded rod or rebar Substrate Installation Temperature 23F (-5C) to 104F (40C) In-Service Temperature Range -40F (-40C) to 320F (160C) Storage Temperature 41F (5C) and 77F (25C) Shelf Life 18 months Volatile Organic Compound (VOC) 41 g/L

NOTE: Ensure the adhesive is conditioned to a minimum temperature of 65F (18C) for installation in concrete temperatures between 0F and 23F (-18C and -5C).