Spyder 600002CF Description

Spyders Tungsten Carbide-Tipped (TCT) hole saws cut more materials up to 5x faster and make up to 10x more cuts lasting longer than conventional bi-metal hole saws. TCT hole saws drill through wood, MDF, fiber cement board, porous concrete block, ceramic wall tile, plastic/PVC and more.

Spyder 600002CF Includes

• (1) Hole Saw

Spyder 600002CF Features

• Up to 10x more cuts and up to 5x faster than standard bi-metal hole saws
• Spyders Rapid Core Eject arbor system ejects cores without prying, quickly changes diameter, cuts at an angle, and enlarges existing holes
• Drill wood, MDF, plywood, fiber cement board, porous concrete block, some brick, ceramic wall tile, plastic, PVC and more
• Tungsten carbide tipped for extended life, clean cuts and extreme material drilling versatility
• Universal thread uses Spyder arbor/pilot bits or other universal hole saw arbors
• Maximum cut depth of 2-3/8-in
• Not for drilling metal, wood with nails, or in block/brick/tile applications with a Mohs hardness of 6 or greater
• Always use a drill motor with a support handle in standard rotary drilling mode only
• Not for use in hammer mode

Spyder 600002CF Specifications

Arbor Hex: 8 Saw Diameter(s): 3/4-Inch Series: Rapid Core Eject Tipped: Tungsten Carbide Tipped (TCT) Nominal Dimension Size: 3/8-Inch Metal Conduit, 1/2-Inch Metal Conduit, 1/2-Inch PEX, 5/8-Inch PEX, 3/8-Inch Black Pipe 1/2″-20 (Hex8): 3/8″ Hex Shank UPC Width (Inches): 0.6 UPC Height (Inches): 2.4 UPC Length (Inches): 0.6 UPC Weight (Pounds): 0.19