Simpson Strong-Tie CPS10 Description

The Simpson Strong-Tie CPS10 is a composite-plastic standoff designed for increased concrete surface area and maximum durability.

Simpson Strong-Tie CPS10 Includes

• (1) Composite Plastic Standoff

Simpson Strong-Tie CPS10 Features

• Made from durable composite plastic
• Designed to increase concrete surface area
• Rust-resistant material
• Compatible with 10×10 posts

Simpson Strong-Tie CPS10 Applications

• Securing 10×10 posts to concrete surfaces
• Providing a durable and rust-resistant standoff solution

Simpson Strong-Tie CPS10 Installation Overview

1. Drill a 3/4″ diameter hole, 10″ into the center of the post.
2. Clean out dust and fill the hole halfway with Simpson Strong-Tie SET epoxy anchoring adhesive.
3. Insert all-thread rod and allow epoxy to set and cure.
4. Secure standoff to post using four 10d nails.
5. Drill a 3/4″ diameter hole per anchor design in the concrete.
6. Clean out dust and fill the hole halfway with Simpson Strong-Tie SET epoxy anchoring adhesive.
7. Insert post subassembly into the hole and allow epoxy to set and cure.

Simpson Strong-Tie CPS10 Specifications

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values.