Simpson Strong-Tie CPS12 Description

The CPS12 Composite Plastic Standoff provides a code-required 1″ standoff for wood-to-concrete or masonry applications, featuring a durable composite plastic construction and a black finish for a custom look.

Simpson Strong-Tie CPS12 Includes

• (1) Composite Plastic Standoff

Simpson Strong-Tie CPS12 Features

• Provides code-required 1″ standoff
• Multiple sizes to support a variety of projects
• Black finish for a custom look

Simpson Strong-Tie CPS12 Applications

• Fastening wood-to-concrete or masonry
• Indoor architectural projects requiring standoff bases

Simpson Strong-Tie CPS12 Installation Overview

1. Drill a 3/4″-diameter hole, 10″ into the center of the post.
2. Clean out sawdust and fill hole halfway with Simpson Strong-Tie SET-3G epoxy anchoring adhesive.
3. Insert all-thread rod while twisting the rod, and allow the epoxy to set and cure.
4. Secure standoff to post using four 0.148″ x 3″ nails.
5. Drill a 3/4″-diameter hole per anchor design.
6. Clean out dust and fill hole halfway with Simpson Strong-Tie SET-3G, ET-3G or AT-3G anchoring adhesive.
7. Insert post subassembly into hole, and allow the epoxy to set and cure.

Simpson Strong-Tie CPS12 Specifications

NOTE: Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non-top-supported installations (such as fences or unbraced carports).