Simpson Anchors HWSC362-KT Description

The HWSC362-KT is a head-of-wall slide-clip connector designed for curtain-wall construction, providing up to 1 inch of movement and featuring a galvanized finish for durability.

Simpson Anchors HWSC362-KT Includes

• (50) HWSC362 connectors
• (110) XLSH78B1414 #14 shouldered screws

Simpson Anchors HWSC362-KT Features

• Edge stiffener rolled into the web and flange for added strength
• Unique cone-shaped dimple for alignment and locking
• Replaces slotted track for easier panelization
• Allows up to 1 inch of movement up and down

Simpson Anchors HWSC362-KT Applications

• Curtain-wall construction for structural support

Simpson Anchors HWSC362-KT Installation Overview

1. Install with (1) #10-16 screw into each track flange to each flange of clip.
2. Use (2) XLSH78B1414 #14 shoulder screws (included). Install screws into the center of the slot at No-Equal logo.
3. Use an optional #10 screw to lock deflection gap during panel construction. Remove after installation is complete.

Simpson Anchors HWSC362-KT Specifications

NOTE: The HWSC connector is specifically designed for use with printed studs and tracks such as FrameCAD, Arkitech, Howick and Pinnacle. Not intended for use with typical manufactured studs and tracks.