Simpson Strong-Tie HSKP5.75X17-W Description

The Simpson Strong-Tie HSKP5.75X17-W is a high-capacity, concealed beam hanger engineered for mass timber construction. Designed for wood-to-wood and wood-to-steel applications, this hanger delivers exceptional strength while preserving the natural beauty of exposed wood connections.

Simpson Strong-Tie HSKP5.75X17-W Includes

• (1) HSKP5.75X17-W Connector
• (1) CJTPL 1/2″ Dia. Steel Dowel
• (2) SDCF27614 Screws
• (2) SDCF22858 Screws

Simpson Strong-Tie HSKP5.75X17-W Features

• High Load Capacity: Code-listed for loads from 22 to 32 kips, handling large structural demands.
• Concealed Design: Maintains a clean wood-only appearance with a hidden connector setup.
• Fire-Rated: Meets two-hour fire resistance standards for enhanced safety.
• Precision Fit: Generous fit-up tolerance simplifies beam installation on site.
• Factory Install Ready: Prepped for off-site fabrication to improve jobsite efficiency.

Simpson Strong-Tie HSKP5.75X17-W Applications

• Mass timber construction
• Wood-to-wood or wood-to-steel beam connections
• Architectural builds requiring concealed connections

Simpson Strong-Tie HSKP5.75X17-W Installation Overview

1. Verify kit contents and inspect for damage or defects.
2. Align the hanger on the beam and mark screw hole locations.
3. Drive the included SDCF screws at specified angles into the beam.
4. Lower the beam into position so the hanger is properly seated.

Simpson Strong-Tie HSKP5.75X17-W Specifications

NOTE: When installing SDCF screws for the HSKP connection, do not exceed recommended seating torque values.