Simpson Strong-Tie META40 Description

The META40 Embedded Truss Anchor provides a reliable solution for securing roof trusses to concrete and masonry walls, designed for high-wind construction and seismic forces.

Simpson Strong-Tie META40 Includes

• (1) META40 Embedded Truss Anchor

Simpson Strong-Tie META40 Features

• Indented embedment line ensures accurate embedment depth
• Compatible with the Simpson Strong-Tie TSS and TBP8 moisture barrier plate
• Load rated for wind and seismic forces

Simpson Strong-Tie META40 Applications

• High-wind construction
• Seismic force resistance

Simpson Strong-Tie META40 Installation Overview

1. Use all specified fasteners as per guidelines.
2. Embed 4 inches into a 6-inch minimum concrete beam or 8-inch nominal grouted block wall.
3. For mislocated truss anchors, provide a shim designed by a Truss Engineer if the gap is between 1/8 inch and 1 1/2 inches.
4. Install anchors with spoons facing outward and straps spaced no more than 1/8 inch wider than the rafter/truss width in double anchor installations.
5. Ensure lateral loads are limited to 54 mil (16ga.) CFS members.

Simpson Strong-Tie META40 Specifications

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values.