Simpson Strong-Tie STB2-75614 Description

The Simpson Strong-Tie Strong-Bolt 2 Wedge Anchors are engineered for reliable performance in both cracked and uncracked concrete, and masonry applications.

Simpson Strong-Tie STB2-75614 Includes

• (10) 3/4″ x 6-1/4″ Strong-Bolt 2 Wedge Anchor

Simpson Strong-Tie STB2-75614 Features

• Dual undercutting embossments for enhanced load-carrying capacity
• Chamfered top prevents mushrooming during installation
• Suitable for static and seismic loading conditions
• Versatile for horizontal, vertical, and overhead applications

Simpson Strong-Tie STB2-75614 Applications

• Anchoring structural and non-structural elements such as pipes, struts, and fixtures
• Overhead indoor construction
• Mounting electrical equipment
• Warehouse racking

Simpson Strong-Tie STB2-75614 Installation Overview

1. Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
2. Blow the hole clean using compressed air.
3. Assemble the anchor with nut and washer, ensuring the nut is flush with the top of the anchor.
4. Place the anchor in the fixture and drive it into the hole until the washer and nut are tight against the fixture.
5. Tighten to the required installation torque.

Simpson Strong-Tie STB2-75614 Specifications

NOTE: Do not use an impact wrench to set or tighten the Strong-Bolt 2 anchor. Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor’s load capacity.