Simpson Strong-Tie DIABL50 Description

The Simpson Strong-Tie DIABL50 Lipped Drop-In Anchor is designed for secure and flush installation, featuring a zinc-plated finish and compatibility with 1/2-inch rods.

Simpson Strong-Tie DIABL50 Includes

• (50) Lipped Drop-In Anchor

Simpson Strong-Tie DIABL50 Features

• Positive-set marking system indicates when anchor is properly set
• Lipped drop-in version available for flush installation
• Hand- and power-setting tools available for fast, easy and economical installation
• Fixed-depth stop bit helps you drill to the correct depth every time
• Available in coil-thread version for 1/2″ and 3/4″ coil-thread rod

Simpson Strong-Tie DIABL50 Applications

• Mechanical installations requiring secure anchoring
• Electrical setups needing reliable anchor points
• Plumbing systems requiring flush-mounted anchors

Simpson Strong-Tie DIABL50 Installation Overview

1. Drill a hole in the base material using the specified diameter carbide drill bit or fixed-depth bit.
2. Insert the anchor into the hole and tap with a hammer until flush against the surface.
3. Using the designated Drop-In setting tool, drive the expander plug towards the bottom of the anchor until properly set.
4. Insert bolt or threaded rod ensuring minimum thread engagement equal to the nominal diameter of the threaded insert.

Simpson Strong-Tie DIABL50 Specifications

NOTE: Oversized holes will reduce the anchor’s load capacity.