Simpson Strong-Tie SET-XP10 Description

Simpson SET-XP10 is a high-strength epoxy adhesive designed for anchoring threaded rod and rebar doweling in cracked and uncracked concrete.

Simpson Strong-Tie SET-XP10 Includes

• (1) 8.5 oz. single cartridge
• (1) EMN22i mixing nozzle
• (1) extension

Simpson Strong-Tie SET-XP10 Features

• Design flexibility for sustained load performance at elevated temperatures
• Suitable for dry and damp conditions with in-service temperatures from -40F to 150F
• Recognized for rebar development and splice length design provisions of ACI 318
• Approved for installation with vacuum-drill bit system without further hole cleaning
• Easy hole-cleaning without power-brushing
• Manufactured in the USA using global materials

Simpson Strong-Tie SET-XP10 Applications

• Threaded rod anchoring and rebar doweling into concrete and masonry
• Recognized for rebar development and splice length design provisions of ACI 318
• Suitable for horizontal, vertical, and overhead applications
• Multiple DOT listings

Simpson Strong-Tie SET-XP10 Installation Overview

1. Ensure surfaces to receive epoxy are clean
2. Base material temperature must be 50F or above during installation
3. Store cartridges in a warm area to maintain optimal material temperature
4. Mixed material in nozzle hardens in 30 minutes at 70F or above
5. Use only Simpson Strong-Tie mixing nozzles as per instructions

Simpson Strong-Tie SET-XP10 Specifications

Mix Ratio/Type 1:1 epoxy Mixed Color Teal Base Materials Concrete (cracked and uncracked), Masonry (uncracked) Base Material Conditions Dry, water-saturated Anchor Type Threaded rod or rebar Substrate Installation Temperature 50F to 110F In-Service Temperature Range -40F to 150F Storage Temperature 45F to 90F Shelf Life 24 months Volatile Organic Compound (VOC) 3 g/L

NOTE: This item is NOT eligible for express shipping, and must ship via Ground only.