Simpson SET3G10 Description

Simpson SET-3G is a high-strength epoxy adhesive designed for anchoring threaded rod and rebar doweling in cracked and uncracked concrete.

Simpson SET3G10 Includes

• (1) 8.5-oz. Coaxial Cartridge
• (1) EMN22i Mixing Nozzle
• (1) Extension

Simpson SET3G10 Features

• Exceptional performance with superior bond strengths for ductile solutions in high seismic areas.
• Improved sustained load performance at elevated temperatures.
• Versatile for all base material conditions with in-service temperatures from -40F to 176F.
• Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
• Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
• Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method.
• Low-odor formulation.
• Manufactured in the USA using global materials.
• Compatible with potable water applications.

Simpson SET3G10 Applications

• Threaded rod anchor and rebar dowel installations in cracked and uncracked concrete under various environmental conditions.
• Installation in downward, horizontal, and upwardly inclined orientations, including overhead.
• Qualified for use in structures assigned to Seismic Design Categories A through F.

Simpson SET3G10 Installation Overview

1. Ensure surfaces to receive epoxy are clean per approved hole cleaning method.
2. Base-material temperatures must be 40F or above during installation.
3. Condition adhesive to a temperature between 70F and 80F for optimal results.
4. Store cartridges in a warm, uniformly heated area to warm cold adhesive.
5. Mixed material can harden in the dispensing nozzle within 30 minutes at 70F.
6. Use only Simpson Strong-Tie mixing nozzles as per instructions.
7. Refer to the Adhesive Anchoring Installation Instructions for full details.

Simpson SET3G10 Specifications

Mix Ratio/Type 1:1 epoxy Mixed Color Gray Base Materials Concrete and masonry – cracked and uncracked Base Material Conditions Dry, water-saturated, water-filled, and submerged Anchor Type Threaded rod or rebar Substrate Installation Temperature 40F (4C) to 100F (38C) In-Service Temperature Range -40F (-40C) to 176F (80C) Storage Temperature 45F (7C) to 90F (32C) Shelf Life 24 months Volatile Organic Compound (VOC) 2 g/L

NOTE: This item is NOT eligible for express shipping, and must ship via Ground only.