Simpson Strong-Tie STB2-62100S6F10 Description

The Simpson Strong-Tie Fully Assembled Strong-Bolt 2 Wedge Anchors are engineered for maximum performance in corrosive environments, ideal for heavy-duty fastening into cracked or uncracked concrete.

Simpson Strong-Tie STB2-62100S6F10 Includes

• (10) 5/8 in. x 10 in. Type 316 Stainless-Steel Wedge Anchor

Simpson Strong-Tie STB2-62100S6F10 Features

• Chamfered top designed to prevent mushrooming during installation
• Qualified for static and seismic loading conditions
• Suitable for horizontal, vertical and overhead applications
• Qualified for minimum concrete thickness of 3 1/4 in.
• Standard fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
• Tested per ACI355.2 and AC193

Simpson Strong-Tie STB2-62100S6F10 Applications

• Heavy-duty fastening into cracked or uncracked concrete
• Reinforcing structural connections in coastal commercial builds
• Anchoring handrails in residential garages
• Marine, wastewater, and chemical exposure environments

Simpson Strong-Tie STB2-62100S6F10 Installation Overview

1. Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed.
2. Assemble the anchor with nut and washer so the top of the nut is flush with the top of the anchor.
3. Place the anchor in the fixture, and drive it into the hole until the washer and nut are tight against the fixture.
4. Tighten to the required installation torque.

Simpson Strong-Tie STB2-62100S6F10 Specifications

NOTE: Do not use an impact wrench to set or tighten the Strong-Bolt 2 anchor. Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor’s load capacity.