Simpson Strong-Tie STB2-75100P1 Description

The Strong-Bolt 2 Wedge Anchor is a zinc-plated, high-performance anchor designed for cracked and uncracked concrete. It is suitable for static and seismic loading conditions.

Simpson Strong-Tie STB2-75100P1 Includes

• (1) Strong-Bolt 2 Wedge Anchor

Simpson Strong-Tie STB2-75100P1 Features

• Chamfered top designed to prevent mushrooming during installation
• Qualified for static and seismic loading conditions (seismic design categories A through F)
• Suitable for horizontal, vertical, and overhead applications
• Qualified for minimum concrete thickness of 3 1/4 in., and lightweight concrete-over-steel deck thickness of 2 1/2 in. and 3 1/4 in.
• Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
• Tested per ACI355.2 and AC193

Simpson Strong-Tie STB2-75100P1 Applications

• Cracked and uncracked concrete anchoring
• Seismic and static load applications
• Horizontal, vertical, and overhead installations

Simpson Strong-Tie STB2-75100P1 Installation Overview

1. Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
2. Blow the hole clean using compressed air.
3. Assemble the anchor with nut and washer, ensuring the nut is flush with the top of the anchor.
4. Insert the anchor into the hole and tighten to the required torque.

Simpson Strong-Tie STB2-75100P1 Specifications

NOTE: Do not use an impact wrench to set or tighten the Strong-Bolt 2 anchor. Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor’s load capacity.