Simpson Strong-Tie ZN25300SS Description

Zinc Nailon anchors are low-cost, mushroom head anchors for applications under static loads. Easily installed by hitting a hammer on the head, driving the pin through the anchor to expand and hold it in place.

Simpson Strong-Tie ZN25300SS Includes

• (100) Zinc Nailon Pin-Drive Anchor

Simpson Strong-Tie ZN25300SS Features

• Available with carbon and stainless-steel pins
• Pin and head configuration designed to make anchor tamper-resistant

Simpson Strong-Tie ZN25300SS Applications

• Ideal for use in concrete, CMU, brick, and other base materials

Simpson Strong-Tie ZN25300SS Installation Overview

1. Drill a hole in base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed.
2. Drill the hole to specified embedment depth, plus 1/4″ for pin extension, and blow hole clean using compressed air.
3. Position fixture and insert Nailon anchor.
4. Tap with hammer until flush with fixture, then drive pin until flush with top of head.

Simpson Strong-Tie ZN25300SS Specifications

NOTE: Not for use in overhead applications. Nailon anchors are not recommended for eccentric tension (prying) loads as capacity will be greatly reduced in such applications.